Wood chip machine in the course of the accident will cause damage to the wood chip machine, reducing the life of the chip machine. Today to tell you about how to improve the life of the chip machine.
1, electrical equipment, power lines should meet the relevant professional requirements.
2, hot air guns, grinders and welding machine towing the power cord in the use of the process, must be far away from its work site, so as not to damage the brain wire leakage.
3, the welder in the non-use, shall not be placed directly on the geomembrane membrane surface, should be placed in the stent or sandbag.
4, in addition to hot air welding, the hot air gun's mouth in any case shall not contact with the geomembrane surface, and as far as possible away from the membrane, the human body, machinery and other objects. Welding machine in the non-use, shall not be placed directly on the geomembrane membrane surface, should be placed in the stent or sandbag.
5, after the use of cutting knife knife, the blade should be immediately recovered within the knife box.
6, in the field of the use of a variety of temporary small tools, the use of finished, should be promptly placed in the toolbox.
7, where the edge of the steep slope and other dangerous places, must wear a seat belt, must bring a helmet.
8, is strictly prohibited from the extrusion welding machine head off the solder material directly discarded in the geomembrane surface.
9, wood chip construction site forbidden smoking, should also be equipped with fire facilities, shall not wear nails with nails or high-heeled hard shoes to the membrane surface walking, is not allowed to engage in the destruction of geomembrane products all the activities.