The most professional gasoline log splitter manufacturer >>

Log splitter - how to extend the life of wood shredder blades


   The blade is the crushing tool for the main machine in the wood crusher. After the wood crusher has been used for a long time, the blade will wear to a certain extent. At this time, users will have to replace the new blade. Visible blade for the production of importance. There are many users and friends to say, your blade quality is not good, it does not take long, in fact, not the case, the degree of wear and tear of the material you are processing the hardness of the material, the length of production time, the operation is properly held close The relationship, then, how to make the blade can be used for longer?
    First, the use of wood shredders, feeding personnel to be careful, like iron nails, metal blocks and other materials must not enter the machine, otherwise it will cause serious damage to the blade, and even cause card and other phenomena;
    Second, when adjusting the blade, we must be careful to avoid the blade hit a part of the machine inside, damage the sharpness of the blade;
    Third, the replacement of the new blade, to ensure that the blade length consistent with the same quality, to avoid the blade is too long or heavy and light, resulting in machine rotor imbalance, so that the machine will appear in the production of noise and vibration phenomenon, as well, After the blade is changed, be sure to check the screw on the blade to ensure that the screw has been tightened to prevent the screw from loosening in the future.
    Fourth, when buying a blade must buy high-quality wear-resistant blades, which is very important, only the blade of good quality, to use longer. If you do the above points, to ensure that your wood shredder without frequent blade change, to achieve the purpose of longer use.