The most professional gasoline log splitter manufacturer >>

Test the Performance Your Forest King Log Splitter

Date:17-03-30

At Cnsuperpower, we have a variety of high quality Forest King Log Splitter for sale. We sells all products that are well designed, powerful and excellent. We understand that the hardness of the wood is different, that is why our logarithmic dispenser can guarantee that any wood you intend to burn in the fireplace is separated. We also offer a range of accessories to help you make use of the log divider more easily and more fun to use. For example, our workbench can assign logs to you, while the cover provides extreme splitter protection.

If you use a log splitter as a part of the day to day running of your business or you use one to cut up firewood for use in your home, it is important that you regularly perform tests on it to ensure that it is working at its optimum level of performance. Follow the below instructions to ensure that you complete your tests safely and correctly:

If you use the log splitter as part of your business's day-to-day run, or use a sheared firewood at home, you must test it regularly to ensure that it runs the best performance level. Please follow the instructions below to ensure that your log splitter is properly tested:

Step 1: Determine the model and manufacturer of the log splitter. Pay attention to the pressure applied by the design, and then select the hydraulic tension tester that can withstand this force to ensure that the results are accurate and avoid injury.

Step 2: Wear safety glasses to reduce the risk of eye injuries. Then you will need to open the log splitter to ensure that all moving parts are working properly.

Step 3: Turn off the logarithmic splitter and disconnect its power supply. Then, follow the instructions to set your hydraulic tensile tester to fit your model. Quickly open the liquid tank of the shunt to check the liquid level low or contaminant.

Step 4: Position the hydraulic tension tester in the separation block. You will need to test several times to record the results to determine if the actual output of your machine is different from the manufacturer's standard. Remove the tester.

You can start dividing your wood now. Notice all the moving parts of the log divider to make sure they work properly and use the stopwatch to determine the length of time that each log is divided. You should also check each log after segmentation to make sure the cut is clean.