How To Disassemble The Log Splitter

Home / News / How To Disassemble The Log Splitter

  Log splitter will inevitably have some failures during normal use. Then when the equipment fails, it needs to be disassembled for maintenance, but the equipment often appears due to incorrect methods during disassembly. If the damage is more serious, how should the equipment be repaired when it is repaired?

  1. We need to mark all parts when disassembling so that the parts can be installed in the correct position during subsequent disassembly and installation.

  2. Also, if there is a lot of dirt on the parts during disassembly, they must be cleaned up by the way, and all parts must be in a clean state during the disassembly process.

  3. Another thing is that we need to adhere to the principle of less disassembly when disassembling. Many log splitters do not disassemble and do not affect maintenance, so do not disassemble.

  4. When disassembling, choose suitable tools for disassembly, so that it will be more convenient and quick when disassembling. Also, when disassembling, you must not use brute force to avoid deformation and damage of parts.

  5. The disassembled parts need to be checked for unusable parts and need to be replaced.

  6. ​​The disassembled parts need to be cleaned with diesel oil and wiped clean before installing them back.

  The above describes the steps of disassembling the log splitter during maintenance. We also need to be careful not to lose some parts when we install it later because the correlation performance between many parts is relatively large, it is very likely Because of the loss of one of the parts, the entire device is abnormal when in use, so this is also a reminder to operate according to the instructions of the manual when installing and disassembling.