Several Output Methods Of Log Splitter

　　If users want to use a log splitter well, they need to have a complete understanding of the log splitter. Understand the importance of every detail. During the use of a log splitter, each process has a direct impact on the final crushing effect. Therefore, each crushing process must be kept in good working condition. Today, CNSUPERPOWER will tell you about several discharge methods of log splitter, so that users can have a complete understanding of different discharge methods of log splitter.

　　The output method of log splitter. There are three ways to output the crushed products through the discharge device: self-weight blanking, negative pressure suction, and mechanical conveying.

　　(1) Small log splitters mostly use self-weight cutting to simplify the structure. This method is simple in structure and low in cost, but it is difficult to solve the problems of transportation, wind elimination, and dust removal of crushed products.

　　(2) Most of the medium-sized log splitters are equipped with a negative pressure suction device. The advantage is that it can absorb the moisture of the finished product, reduce the humidity in the finished product, which is beneficial to storage, improve the crushing efficiency by 10-15%, and reduce the dust in the crushing chamber.

　　(3) Mechanical discharging adopts the discharging device of a screw conveyor or scraper conveyor plus negative pressure suction, which is often used for mechanical discharging. The mechanical discharge method can not only prevent dust from escaping, but also can cool down and remove water, prevent excessive crushing of materials, increase output and reduce energy consumption, and can ensure that the log splitter suction volume and wind pressure are stable.