Tips For Improving The Abrasion Resistance Of Chipper Shredder

　　   Wood slicer, also known as the chipper shredder, is a device for making wood chips. It can cut pine, miscellaneous wood, poplar, fir, and other kinds of wood, Moso bamboo into thin slices, as well as slabs, veneers, bamboo branches, corn cobs, cotton swabs, reeds, and other materials. The material specifications need to be adjusted within a certain range. The product has rules of discharging and high output.

　　  A chipper shredder is an ideal equipment for the material preparation section of industrial products such as paper mills, wood-based panels, MDF, and various wood chip production bases. Manufacturers can design and manufacture products of various specifications according to the user's production capacity. With more and more applications of chipper shredder products, the public has higher and higher requirements for equipment.

　　But in the process of use, this is inevitable. We can't avoid it all the time. We can only reduce it as much as possible. This is a product with excellent performance, which not only brings certain economic benefits to the enterprise but also has abrasion resistance. Sex, then here is a brief introduction to its wear-resistant skills:

　　   1. The chipper shredder cutting tool must be sprayed. Spraying the tool is a good way to extend the service life of the tool. For example, electroplating is a traditional method of material protection, which has a wide range of applications and is not limited by the size and batch size of the workpiece, and its tools can be protected. The other is thermal spraying technology, which uses gas, liquid fuel, etc. as the heat source, atomized and sprayed by high-speed airflow, and deposited on the surface of the pre-treated workpiece to form a firm attachment to the surface of the tool.

　　  2. The wood chip machine must be maintained before use. The newly installed wheel tires are prone to looseness and must be checked frequently. Pay attention to whether all parts of the machine are operating normally. Check the degree of wear of the easy-to-wear parts, and pay attention to the replacement of the easy-to-wear parts at any time. On the plane of the bottom frame of the mobile equipment, dust and other debris should be handled to prevent the machine from encountering unbreakable materials, and the movable bearings cannot be on the bottom frame, causing major accidents.

　　3. The maintenance work of the chipper shredder after work is done is also to improve the wear resistance. It must clean up the discarded wood chips after the work is completed, and no residue can be left. One is to affect the next work, and the other is to improve the machine. Cause damage. Its working time cannot belong. It is necessary to stop and rest to better extend its service life.

　　  In the use of a chipper shredder, we must carry out coating protection work. This is also a direct way to extend life, followed by maintenance work and frequent inspections. This kind of inspection is mainly to find out the problems of the equipment in time and carry out replacement and maintenance. There are many ways to improve its wear resistance. Improving the wear resistance of the chipper shredder is helpful to the use, operational stability, and service life of the equipment. It can also effectively reduce the frequency of equipment failures and reduce maintenance costs.