How Does A Wood Splitter Keep Warm In Winter?

　　In the cold winter, the efficiency of any equipment will be reduced to a certain extent, especially industrial equipment, such as wood splitters. When using a wood splitter in winter, you need to use some methods to control its temperature, so that the temperature is too low to affect the crushing effect of the material, as shown below:

　　Winter is cold and snowy, and the temperature of the wood splitter fluctuates quickly. How to ensure that if the temperature of the equipment itself is insufficient in winter, the dried materials will not achieve the expected results. Then, we need to dry the material two or more times, which greatly increases the production cost, which is a result that all of us don't want to see. In winter, the outdoor temperature is relatively low. It takes a lot of effort to maintain the drum temperature of the wood splitter.

　　As long as we are willing to find a way, there are some techniques to ensure the original temperature of the wood splitter equipment. According to the temperature display on the temperature control device, to control the amount of fuel added to the wood splitter, please remember to follow the principle of multiple small quantities to avoid large temperature fluctuations due to too much or too little fuel. It can save resources and play a role in temperature control. You should flexibly choose the required temperature according to the material to be dried. If the temperature required for drying of the material is higher, a fuel with a higher calorific value must be selected at this time. If the fuel type is single, the temperature required for the material can be eliminated. Add or reduce fuel. Installing temperature control equipment can always detect the temperature inside the wood splitter. The operator of the wood splitter must record the temperature, analyze the temperature change, and make corresponding adjustments according to the change. By adjusting the ventilation of the drying equipment and reasonably controlling the airlock of the drying equipment during the drying process, the purpose of increasing the temperature can also be achieved.

　　How should wood splitter advance with the times to achieve energy saving and consumption reduction? After paying more and more attention to this issue, people pay more attention to it. Now, the energy-saving and consumption reduction of wood splitters has also been put on the agenda. Let me tell you how to reduce coal consumption. In fact, for the river sand dryer, the utilization rate of heat energy plays a very important role in the drying process, and this role is still very important. If the heat energy cannot be taken away in time, it will have a huge impact on the entire system. Even if the circulation is not smooth, it will have a great impact on the entire system. Inwood splitters, the fans usually used are relatively large, and the use of frequency converters can save 30% of energy. When the inverter is not used, the air volume of the system is adjusted by the air volume control valve. When using the inverter, it will automatically adjust according to the air volume required by the system, usually, about 35Hz, and the working current of the fan is about 70% of the rated working current, which can save 30%ℜ24ℜ300 electric energy every year.

　　Therefore, it is not easy to make full use of heat energy and reduce the dryness of river sand. To achieve this, we need to work hard in all aspects. Wood splitter is developing in the direction of energy-saving and consumption reduction. The device has high energy efficiency, safety, stability, economy, and energy saving.