How To Control The Thickness Of Chipper Shredder

　　A Chipper shredder is used to cut wood chips. The finished product can be used to process furniture. Therefore, it is very important to control the thickness and size of wood chips. So how to control it reasonably when using the equipment?

　　1. In production, the knife cuts wood and combines it with a fixed knife or shell to realize wood cutting. To control the finished wood, the angle and length of the knives and the distance between the fixed knives are very critical.

　　2. The extension length of the blade determines the thickness of the finished wood chips. The thickness of the finished chipper shredder can be adjusted by controlling the extension length.

　　3. The angle and size of the blade are closely related, but generally speaking, this cannot be changed. Most of them are set by the factory and there is no way to adjust them. It is recommended not to change the angle of the blade without knowing it.

　　4, the distance between the chipper shredder tool and the fixed tool. If this distance is not well controlled, the movable knife will collide with the fixed knife or bite during use, which is very dangerous to production, affects the machine itself, and poses a threat to the operator. Therefore, you need to manually rotate and debug after adjustment.

　　If you want to use a chipper shredder better, you need to master the thickness and size control method of the finished product and pay attention to controlling the thickness when using it to improve the efficiency of use.