The Log Splitter Is An Important Equipment In The Economic Industry

　　Paper is the most common in people's lives. Paper is made of pulp, which is made of wood flour. The most primitive material is wood chips. You should understand why a log splitter is a vital machine in the paper industry. Because the wood chips are processed by the log splitter. What should be paid attention to when using a log splitter?

　　The working parts of the log splitter are mainly blades and hammers. After the branches pass through these two parts, wood chips will be formed. Blades and hammerheads rely on bearings to run at high speeds to crush branches. It seems very simple, but before using the log splitter, you must first check whether there are iron filings or other debris inside the machine. Otherwise, the debris will damage the blades and bearings. Check the temperature of the bearing regularly. If the temperature is too high, stop using it immediately, and then continue to work after maintenance.

　　Under current social conditions, using tree branches as raw materials is more energy-efficient and more environmentally friendly than using wood directly. Usually, in addition to burning, only the branches can be discarded, but now, they can be crushed with a log splitter and used to make paper or biomass fuel pellets. In the new machinery industry, this is indeed a popular product.

　　As the smog becomes more and more serious, environmental problems have severely affected our daily lives. However, the current weak awareness of environmental protection in enterprises has caused many log splitters to continue to use ancient production techniques, which not only pollute the environment but also affect the health of workers.

　　Some enterprises have been punished or inspected by the environmental protection department due to environmental protection issues, which has seriously affected the normal operation of the enterprise. This has promoted the emergence of various environmental protection equipment. The environmentally friendly log splitter is one of them. The production of an environmental log splitter needs to start from several aspects.

　　1. Work in a confined space

　　The production space of the log splitter is best sealed to prevent dust from spilling out of the workshop during processing.

　　2. Increase the collector.

　　In the production process of the log splitter, when the wood enters the wood mill, a high-speed feeding and discharging process will occur. The sawdust from the discharge port can be sprayed one or two meters away, and a lot of dust will appear in the middle. The most suitable method is to connect the discharge port to the collector to remove it from the chipper. The finished product goes directly to the collector, which is also the most environmentally friendly method, and it also provides convenience for the collection of finished products.