Precautions for the use of professional wood splitters

Based on the recycling and processing of industrial old wood and surplus materials, the timber factory regenerates raw materials for incense, papermaking, mosquito coils, mushroom cultivation, agriculture, board, building materials and other industries, makes full use of my country's wood resources, reduces the production costs of various industries in my country, and solves the problem of To solve the problem of serious shortage of wood resources, it is an environmentally friendly machine developed by the country. The wood slag crushed by the professional wood splitter is made into furniture recycled board, and made into mechanical charcoal, turning waste into treasure and doubling the value.

The professional wood splitter has reasonable design, compact structure, safety and durability, and high production efficiency. The entire lumber mill equipment is driven only by motor, with low noise, simple structure, compact layout, movable, low price, stable work, low energy consumption, high output, good wood chip quality and low processing cost.

In order to operate the professional wood splitter safely, the following points need to be paid attention to:

1. To make the equipment placement smoothly, the installation direction should be determined according to the actual situation and raw materials on site. Generally, small size models do not need to be used as a foundation, and users can directly use the power testing machine. For medium and above equipment, the base of the main engine and the base of the supply and discharge conveying system should be made according to the basic drawing of the factory, and then professional technicians should be sent to guide the installation.

2. Before use, check the circuit and oil circuit according to the manual to confirm whether the connection is safe. The tightness of the chain, V-belt and transmission mechanism has been adjusted when the equipment leaves the factory or adjusted by the on-site installation personnel of the factory. Users should check frequently in the future use process.

3. The blade is made of alloy steel. After long-term use, if the blade is worn or changed in angle, the fastening screw of the blade can be loosened and the blade can be removed for grinding and adjustment.

4. When the power supply is connected to the 380V three-phase power supply from the switch box or switch cabinet, check whether there are sundries and branch circuits around the equipment that affect the operation of the equipment. After power-on, confirm the rotation direction of the feed roller and run the equipment for about 5 minutes.

If the wood crusher is used improperly, it will cause equipment damage. In fact, some injuries are easily avoidable.

Professional wood splitter be careful not to overspeed and privately transform. Each type of lumber mill has a rated speed. Users should not increase the running speed at will, be careful not to overspeed, and it is forbidden to change the structure and performance of the machine. If you need to use a more powerful professional wood splitter, you should buy it again, don't try to achieve more power by remaking the machine, because all the accessories of the machine itself are determined according to the design intent, modify the power and increase the speed at the beginning Such behavior will not cause the rise of the machine, and sometimes the harm outweighs the benefit, which will reduce the efficiency of the machine.

Professional wood splitters pay attention to regular maintenance, add lubricating oil regularly to ensure smooth operation of the machine, and regularly check whether the stability and efficiency of the machine are normal. If there is any abnormality, you should check the fault or contact the manufacturer. It can also be solved on site, if it cannot be used with failure or without maintenance for a long time.

The professional wood splitter should ensure the stability of the body during use in the timber factory. Be careful not to vibrate the body with great force, and not to extend into dangerous areas such as the feeding port. In addition, pay attention to avoid opening the casing or protective devices. The safe and smooth operation of the machine should be ensured. If the wood crusher is suspected to be malfunctioning, it should be turned off and then turned on for inspection.

In order to make the wood crusher maintain high-intensity operation for a long time, daily maintenance has become the top priority.