How To Improve The Production Efficiency Of The Rapid Splitter

　　Many users may have problems of one kind or another when using rapid splitter. The most fundamental problem is nothing more than how to improve the production efficiency of rapid splitter and increase the benefits. The following summarizes some tips, I hope to help everyone.

　　1. Control the gap between the mold and the pressing wheel. After the material is cured at a high temperature, it will be pressed into shape by the pressing wheel, so that the particles will be dense and beautiful.

　　2. Choose the appropriate mold aperture according to your actual needs. If the aperture is too small, it will cause low output and no discharge, and will seriously affect the production efficiency of the rapid splitter.

　　3. Choose equipment that suits your production capacity, such as the actual output of 1-2 tons. If you choose a machine with an hourly output of 2-3 tons, wouldn’t it be overkill and waste?

　　4. During the production process, the feeding should be even, so as to ensure the smooth operation of the machine and the uniform granulation without blocking the material.

　　5. Regular lubrication and cleaning. Long-term friction between the mold and the pressure wheel will damage the mold. Regular oil injection and cleaning can not only ensure the cleanliness of the mold, but also reduce the friction between the two, reduce costs, and improve production efficiency.

　　The above is the content shared for everyone, I hope it will be helpful to everyone.