The Improved Wear Resistance Of Forest King Log Splitter

  Forest King Log Splitter will be subject to some wear and tear during use. This is inevitable. It can only be made as little as possible. It is a good product, not only because it can be used for The enterprise brings certain economic benefits, but also because it has certain abrasion resistance, so today we will briefly introduce what abrasion resistance it has

  First of all, the cutting tool of the Forest King Log Splitter must be sprayed well, and spraying the cutters is a good way to extend the service life. For example, electroplating is a traditional material protection method. The applicability of electroplating is very strong. It is not limited by the size and batch of the workpiece, and it can protect its tools. There is also thermal spraying technology, which uses gas, liquid fuel, etc. as a heat source, and uses a high-speed airflow to atomize, spray, and deposit on the surface of a pre-processed workpiece to form a firm attachment to the tool surface.

  Secondly, the Forest King Log Splitter must be properly inspected and maintained before work. The newly installed wheel hub is prone to loosening and must be inspected frequently. Pay attention to check whether the parts of the machine can work normally. Pay attention to check the wear degree of the wearing parts, pay attention to replacing the worn parts at any time, often oil the wearing parts, and adjust the working state of the machine to the best. The plane of the bottom frame of the movable device should be out of dust and other materials to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, resulting in serious accidents.

  Finally, the maintenance work of the Forest King Log Splitter is also done to enhance the wear resistance. After the work is completed, the waste wood must be cleaned to prevent debris from remaining in the machine. The first is to affect the next work process. Second, it has a damaging effect on the machine. When working continuously for a long time, be sure to do shutdown inspection and maintenance to better extend the service life of the machine.