Wear Resistance Of Gasoline Log Splitter

  First of all, the tools of the gasoline log splitter must be sprayed well. It is a good way to extend the service life of the tools of the gasoline log splitter. For example, electroplating is a traditional material protection method. The applicability of electroplating is very strong. It is not limited by the size and batch of the workpiece, and it can protect the tools of the gasoline log splitter. There is also the use of thermal spraying technology. Thermal spraying technology uses gas, liquid fuel, etc. as a heat source to atomize, spray, and deposit on the surface of a pre-processed workpiece through a high-speed airflow.
  Secondly, the gasoline log splitter must be well maintained before work. The newly installed wheel hub is prone to loosening and must be checked frequently. Pay attention to whether the parts of the machine are working properly. Pay attention to check the wear of the wearing parts, and pay attention to replacing the worn parts at any time. The plane of the bottom frame of the movable device should be out of dust and other materials to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, resulting in serious accidents.
  Finally, the maintenance work of the gasoline log splitter after the work is also done to enhance wear resistance. After the gasoline log splitter is finished, it is necessary to dispose of the waste wood and prevent debris from remaining in the gasoline log splitter. One is to affect the next work Process, the second is to damage the machine. The gasoline log splitter cannot work for a long time, so it is necessary to do a good job to stop and rest. The gas logline splitter can better extend the service life.