Why Is Petrol Log Splitter Less Efficient ?

　　After petrol log splitter has been used for some time, the phenomenon of reduced work efficiency will naturally occur, which will often be discovered suddenly, leaving users unable to prevent it. Under normal circumstances, its working efficiency will remain within a certain value, but after long-term operation, its various components have been worn out, aging and other problems, coupled with the user does not pay attention to maintenance, the reduction of working efficiency will occur sooner or later. Now let's talk about this problem in detail.

　　1. petrol log splitter's work flows is feeding → peeling → wood removal → re-feeding → re-peeling → wood removal. Normally, it is a continuous process. However, due to improper length and size of wood, the equipment has problems, and the efficiency of the equipment will slowly decrease at this time.

　　2. The decrease of petrol log splitter's use efficiency is mainly related to the work. First, check whether the conveying pipeline of the feeding system is blocked. If the feeding is not timely, the output of the machine will directly decrease. After that, we also need to check the clearance of important working parts. If the clearance is too large, the output of the equipment will decrease slowly. Generally, we will adjust the clearance of the main machine screen to stack, so that the normal workload can be reached. Don't forget to stick to the tool of this equipment. If it is used for a long time, the tool will become not sharp enough due to wear, thus affecting the output. If necessary, replace a set of tools.

　　Therefore, to keep the working efficiency of petrol log splitter as it is or to improve it, in addition to carefully checking whether there is any problem with the machine daily, it is also necessary to regularly carry out maintenance and repair to reduce the occurrence of faults and to prolong its service life based on improving the efficiency. If a problem is found in a part of the machine, it is crucial to decide whether to repair or replace it according to the actual degree.