Forest King Log Splitter Repair Precautions

　　1. It is strictly forbidden to open the feed bin to check the internal working conditions during the work of the Forest King Log Splitter to avoid danger. If the impeller body is found worn out, it should be replaced in time to find the manufacturer for repair. In particular, it is strictly forbidden to make the impeller without the permission of the manufacturer.

　　2. The tension in the transmission triangle tape should be adjusted appropriately to ensure that the triangle tape is evenly stressed. When the motor is driven, the triangle tape on both sides should be selected in groups so that the length of each group is as consistent as possible. If you have no experience or you want to maintain the original current, if you feel that the processing speed is slow and the motor power is small, you should adjust it so that the motor current difference does not exceed 15A. Of course, it is necessary to combine the actual processing output, you still have to call the manufacturer to inquire clearly, so as not to make a big mistake.

　　3. The upper bearing of the main bearing of the Forest King Log Splitter is the floating end, and the lower bearing is the fixed end. After assembly, the belt pulley should be turned flexibly by hand. It belongs to high-speed equipment in the operation of wood crushing processing production lines, and special attention should be paid to safe production. Relevant personnel should stay away from the equipment and repairs should be performed after shutdown. If there is a problem, please ask professional maintenance personnel to solve it. It is strictly forbidden to disassemble the core components without the permission of the manufacturer.