A Petrol Log Splitter What To Check Before Using

　　Before using the petrol log splitter, check the operation of the equipment, check whether the screws are installed completely, whether there are jams in each transmission part, and observe the cleanliness of the equipment and machinery. Make sure that there is no abnormal phenomenon during the working period, and then adjust the working speed. The control of the material and the calculation of the moisture of the wood material should be reasonable.

　　Before the wood enters the petrol log splitter, check the dry humidity and pay attention to the environmental conditions during transportation. If the moisture of the material is too large, it will stick to the inside of the shredder, which can easily cause mechanical damage. There are also small parts of the shredder. It is easy to break, so pay attention to replacement after using it for some time, which means that the capacity of the crusher is greater, which will directly to affect the capacity of production.

　　After the petrol log splitter works normally, it is necessary to prevent the wood with metal or bricks from entering the machine. When there is no doubt about the machine and the material, the feeding work can be carried out, and the material jam should be subtracted when feeding. Of course, it is necessary to maintain the smoothness of the machinery, to increase the work efficiency, and at the same time, it is very helpful to increase the life of the machinery.

　　The mechanical valve can be adjusted to set the thickness of the sawdust, so we can set the fineness of the finished product in advance during processing, or we can change it as needed after a period of work. The longer the work efficiency of the petrol log splitter, the more the output, the more it will affect the effect of milling. Adhesion will directly drive the looseness. Note that the wood chips must be passed through the sieve in advance to affect the output value.