How To Quickly Find The Leakage Method Of Chipper Shredder

　　1. Determine whether the line is indeed leaking.

　　You can use a megohmmeter to measure the insulation resistance of the line, or connect an ammeter to the main switch, and switch on all the mixing plant equipment without opening the equipment. If the ammeter pointer swings, it indicates that the line is leaking.

　　2. Determine the leakage range.

　　Remove the shunt fuse or open the switch. If the ammeter indication does not change, it is the bus leakage; if the ammeter indicates zero, it is the shunt leakage; if the ammeter indication becomes smaller but not zero, it indicates All circuits are leaking.

　　3. Judge whether it is the leakage between the phase line and the neutral line or the leakage between the phase line and the earth, or both.

　　The judgment method is to cut off the neutral line, or the ammeter indication does not change, it is the leakage between the phase line and the earth; if the ammeter indicates zero, it is the leakage between the phase line and the neutral line; if the ammeter indication becomes smaller but not zero, then Means both.

　　After the above inspections, turn on the switches of the line lamps in turn. When a switch is opened, if the indicator of the ammeter returns to zero, it means that the branch line is leaking; if the indicator of the ammeter becomes smaller, it means that there is leakage in other places besides the branch line. Or use a test pen to test in sections. Narrow the search range in turn to find the leakage point. After finding the location of the leakage, a professional electrician must be able to bandage the leakage point. If the electricity is invisible and touchable, you must pay attention to safety.

　　If you want to know more details about the chipper shredder, you can call our hotline for consultation. Professional technicians and sales managers will select the models that are suitable for you.