Reasons For A Smoke When Log Splitter Is Running Normally

　　Log splitter will always encounter some unexpected situations when it is used, such as the situation of sudden smoke during normal operation. Generally, this situation is usually caused by improper operation in our use. If we can use it correctly This equipment, I believe that its service life will be relatively increased, and then we will introduce the reasons for the smoke and the treatment methods.

　　1. First, observe whether the temperature of the log splitter is too high and the smoke is caused by slow heat dissipation.

　　2. Check whether the electric fan inside the log splitter is damaged, or if the machine emits smoke due to the reverse or uninstallation, the electric fan or the damaged electric fan should be repaired or replaced in time.

　　3. The damage or excessive wear of the bearing is caused by the collision of the stator and the rotor. You can check whether the bearing of the log splitter is loose and whether the stator and rotor are installed incorrectly.

　　In the process of using a log splitter, if there is smoke, everyone must solve it in time and correctly. When necessary, we need to shut down it, and we must discover the cause of the problem in time, and then we can do this problem are dealt with and avoided promptly.