Fixed Body Of Chipper Shredder

Home / News / Fixed Body Of Chipper Shredder

  The fixed part of the chipper shredder refers to its cylinder and partition. The following editor will introduce you in detail.

  1. The cylinder is composed of front and rear cylinders, which are divided into upper and lower halves. The front cylinder is cast from 20CrMoA steel;

  2. The rear cylinder is cast from 20CrMoA steel, the front and rear cylinders are connected by vertical flanges, and the front cylinder is supported on the oil tank chassis by a front bearing seat connected by a semi-circular flange;

  3. The rear cylinder of the chipper shredder is supported on the fuel tank chassis by the rear bearing seat connected with itself;

  4. The transverse sliding pin between the rear cylinder and the rear cylinder bracket connected with itself, and the longitudinal sliding pin between the bottom of the rear cylinder and the oil tank chassis form the thermal expansion dead point of the entire cylinder;

  5. There is a longitudinal sliding pin on the bottom surface of the front bearing seat, and the thermal expansion of the crusher moves forward along the sliding pin.

  Also, the placement of the chipper shredder's baffle in its groove must ensure accurate centering and free expansion.