How To Deal With The Rust Of Log Splitter Accessories

Home / News / How To Deal With The Rust Of Log Splitter Accessories

  The log splitter is used to slice the current process, or some other materials can also be sliced ​​using this device, but we will encounter a problem when using it, that is, after the device has been used for a period of time, it may The parts of the equipment will rust due to rain or humidity, so how should we deal with this situation?

  1. You can use a rust remover to clean the accessories, which can also remove the rust on the surface.

  2. Ultrasonic waves can be used to remove rust. The use of ultrasonic vibration machinery can produce small bubbles in the rust removal liquid. These small bubbles will generate mechanical force during the process of forming, growing, and closing, which can make the surface of the accessories, rust, and dirt. Fall off, thereby removing rust.

  3. The impurities and rust layer on the metal surface can be removed first, and then sandblasting is performed.

  4. Rinse: You can use tap water to rinse, generally the tap water will be acidic so that it can react with the rust so that there is a gap between the accessories of the log splitter and the accessories, and it can also be used to remove rust, but this The effect of this method is not very good, only suitable for slight rust.

  5. Manual rust removal: Use emery cloth, scraper, hammer chisel, wire brush, and other tools to remove rust on the surface. This cleaning method is time-consuming and laborious, but the effect of cleaning some details is better.

  6. Chemical soaking: first soak in the corresponding rust removal solution, the acid, alkali, and other chemical substances in the solution will react with the rust on the surface of the accessories so that the oxide scale and rust products can be dropped into the solution. This kind of rust removal effect is also relatively good, but when using this method, you need to pay attention to not soaking for too long to avoid corroding the accessories themselves after the rust is corroded.

  The above is the processing method of log splitter accessories after rust. Although these methods can be used for processing, we also need to pay attention to maintaining various accessories when using it and try to avoid rust.