The Stability Of Petrol Log Splitter Is Very Important

　　For the design and market investment of petrol log splitter, our factory has conducted a lot of research on petrol log splitter to satisfy customers' detailed solutions to the stability of petrol log splitter. According to the reactions of some customers, the decline in the output of the pulverizer was mainly due to the following reasons: First, the material stopped or decreased, and the other reason was the blockage of the pipeline.

　　For the above two situations, the petrol log splitter should be fully reduced during use, and wood should be fed evenly to reduce the occurrence of card machines. The motor selection of petrol log splitter requires the speed and power required by the machine. The motor power varies depending on the type of equipment.

　　Our petrol log splitter motors are tailor-made to ensure stable production. Check the running speed of the machine during use to see if the running speed of the petrol log splitter reaches the normal speed. Check the feeding situation and whether the feeding is even. Stop checking and reduce pipe blockage, then clean it to solve the problem.

　　Check the sharpness of the petrol log splitter blade. Use the blade for a long time. If the wear is severe, please use a sharpener or sharpener for polishing. The bearings of the machine are filled with butter to reduce the service life of the bearings; when using the wood crusher, the output of the machine should be operated in accordance with the operating instructions of the equipment. Production is gradually decreasing. If this happens, an important part of the work will increase the gap. The corresponding solution is to adjust the branch shredder host.

　　A petrol log splitter is a milling machine. The stability of petrol log splitter is very important during use. The petrol log splitter only has a stable operation to ensure output and effect. During the use of petrol log splitter, there are many factors that affect stability. These factors should be avoided. What are the factors that affect the stability of the wood flour machine?

　　The petrol log splitter is composed of different parts, so it starts with wood flour machine parts.

　　First, check whether the processing accuracy of wood flour mechanical parts can reach its assembly;

　　2. Check the rotating part of the wood flour machine to see whether the rotating parts are strictly matched, whether the rotor is concentric, whether the belt groove meets the standard, whether the motor fixing screw is loose, and whether the bearing assembly is properly loose.

　　3. Check whether the rack is at the same level.

　　4. Check the weight of the rotor in the crushing chamber to achieve concentricity;

　　The accuracy of each component in petrol log splitter production is an important factor that affects the stability of the branch, and it is also an important factor to ensure the output and energy consumption of the branch.