Log Splitter Circuit Inspection Method

Home / News / Log Splitter Circuit Inspection Method

  When the wood chip crusher is working, the material can be fully and effectively finely crushed in the crushing cavity, with high output, low energy consumption, high efficiency, and uniformly crushed material. It runs on electric power. In order to make it work normally, we need to check the circuit. Let's introduce the checking method below.

  1. First, the log splitter should be placed steadily, and the installation direction should be determined according to the actual situation of the site and raw materials. Generally, small-size models do not require a production foundation, and users can directly power on the test machine to use.

  2. Before using a log splitter, first check the circuit and oil circuit according to the manual to confirm whether the connection is safe. The tension of each chain, V-belt, and transmission mechanism is generally adjusted when the equipment leaves the factory or adjusted on-site by the factory installer, The user should always check in the future use process.

  3. When connecting to the power supply, connect the 380V three-phase power supply from the switch box or switch cabinet. First, check whether there are branches and debris around the log splitter that affect the operation and operation. After the power is turned on, first determine the rotation direction of the feeding roller to make the equipment run dry. 5 For about minutes, pay attention to listening and observing whether the equipment is abnormal.

  4. The blade is made of alloy steel. After a long time of use, if there is wear or change in the angle, the fastening screw of the blade can be loosened, and the blade can be removed for grinding and adjustment. If the wear is excessive, replace it with a new blade of the same specification.

  When using this equipment, it has low noise, no pollution, simple operation, and convenient maintenance. When checking the log splitter circuit, because electricity is very dangerous, the above methods must be strictly followed when checking.