Method For Increasing Yield Of Forest King Log Splitter

  1. To ensure the uniformity of the feeding belt, if it is too fast or too slow, it will easily cause blockage or no-load rate of the forest king log splitter.

  2. In the process of pulverizing the wood by the forest king log splitter, due to the high degree of fineness of the powder, it is easy to cause a lot of waste, and waste is also the main reason for reducing the output.

  3. Selection of types of crushed materials Brittle materials is easier to crush than hard materials, materials with less fiber content are easier to crush than materials with more fiber content.

  4, crushed materials with low water content materials are easier to crush, the higher the water content, the more difficult to crush. Taking logs as an example, when the moisture content is increased from 13% to 14.5%, the yield will decrease by 20%. Therefore, the moisture content of the crushed material should be less than 13%. And from the storage point of view, the moisture content of the crushed material should be less than 13%.

  5. In the case of other conditions being equal, good quality inserts will cut more thoroughly, have higher efficiency and longer service life, while poor quality inserts will become soft and deformed under continuous high-intensity work. Thereby greatly reducing the crushing capacity of the wood crusher.